Soldering Our crystal products are designed so they may withstand the same standard reflow soldering temperatures as most other electronics components. However, if the reflow temperature is higher than our specification allows, the crystals' performance may be affected. Avoid soldering the product at temperatures higher than specified. Cleaning •General cleaning solutions or ultrasonic cleaning may be used to clean our crystal products, but verification tests are recommended prior to use. •Tuning fork crystals resonate at frequency bands that are close to the washing frequency of ultrasonic cleaning machines and this may cause resonance deterioration in the crystal. Therefore the use of ultrasonic cleaning machines to clean tuning fork crystals should be avoi-ded. After applying ultrasonic cleaning, the functionality of crystals should be verified by testing the performance of the end product. Shock Crystal products are designed to resist shock, but if the products receive excessive shocks or are dropped on the ground, be sure to check for any damages before using. Mounting 〈SMD crystal products〉 Surface mount crystals are designed to be compatible with most automatic mounting processes, but some processes may exert excessive shock which may damage the crystal. Therefore test mounting of the crystal prior to mass production is necessary. If there is a possibility that PCB may be warped, make sure the warping is not to such a degree that the crystal products’ operating characteristics or soldering conditions will be negatively affected. Avoid mounting and processing by Ultrasonic welding because this method has a possibility of an excessive vibration spreading inside the crystal products and becoming the cause of characteristic deterioration and not oscillating. 〈Lead type〉 When bending, forming, or mounting leaded crystal products be careful not to put too much pressure on the glassed part of the base, as it may crack and negatively affect the crystals’ performance. Storage Storing crystal products at high temperatures or high humidity may deteriorate the soldering condition of pins. Do not store in direct sunlight or damp environments.

• 打印本文
• 关闭本页
• 评论
• 推荐度：
• 
• 分享到微博